-->
DISCLOSURE: This blog contains Google Adsense ads and affiliate links to Creativebug via which potential commissions are earned when visitors click through.

Search This Blog > > >

Saturday, 26 February 2022

Jackets to Duffle Challenge [Pt 2]: The Result

Custom Duffle by eSheep Designs
Feeling quite accomplished by this!
To all the duffles I've admired before...
I no longer have to pine any more.
For now I've made my own,
Using sewing skills as shown,
And it's really made my spirits soar.

Didn't know that I was a poet, did you?

I can't say that the above is one of my better poetic efforts, but it sums up my feelings quite well. While my old reliable store bought nylon duffle is still better designed overall, this was a challenge well met and has me feeling very accomplished for it.

[Important aside: we all need to feel accomplished every now and then. Find what does it for you and do it regularly.]

Plus, it allowed me to knock off one of my bucket list items unexpectedly early. Very early, in fact.




Since last week's post covered the often excruciating "behind the scenes" details, this week will focus more on the photos of the completed project than any excessive verbiage. We'll start with this view from the top. (By the way, the colour is slightly off in several of the pictures; it's alternately too blue or too green.)
 
Custom Duffle by eSheep Designs
Top view...

The main zipper is off a roll of zipper tape. The diamond shaped zipper pull is part of my collection of zippiest zipper pulls. The two chrome rings on the shoulder strap may have come off an old chain belt of mine; I don't exactly recall anymore. The strap ends were secured to the rings with a single rivet.

Custom Duffle by eSheep Designs
View of the end...

The two end pocket metal zippers came from my mom's sewing box. I do wish they had been a little bit longer, but given that I didn't want to make a full width zipper pocket, I'm fine with it.

Custom Duffle by eSheep Designs
Three quarter view...

I mentioned last week that I couldn't avoid some small puckers when I sewed up the end panels. You can see one of them in the photo above.

Custom Duffle by eSheep Designs
View of the front...

Because of the thick seam that resulted when the top piece of the side panel was added to the bottom part, when it came time to secure the handle straps, I had to "jump over" this seam and leave a gap between the initial stitching and the reinforcing "X".


Watch live classes for FREE at CreativeLive! Sign Up at CreativeLive
[affiliate link]


The resulting gap ended up being a handy place to thread some bag bling.

Custom Duffle by eSheep Designs
What's a bag without some bling?

This piece is actually a link that I removed from a chain belt. (The belt is still a belt; the link was removed for sizing.)

Custom Duffle by eSheep Designs
View of the base...

The bottom base panel was created out of the back of the long jacket. To increase its strength, this piece was interfaced with both fusible fleece and Decor Bond.

And then just before closing the seams between the lining and the exterior, I slipped in a piece of Peltex to create an even sturdier bottom.

Custom Duffle by eSheep Designs
Adding some Peltex to the base before finishing sewing the lining to the exterior...

As you can see, the lining was also interfaced with Decor Bond. I figured that since I wasn't shelling out for the fabric on this project, it was no big deal to do a deep dive into my stash of interfacing to ensure a durable duffle. (You can see why, however, I've always been reluctant to make something of this size. If one were to use new fabric, the cost of doing so can get prohibitive.)

Speaking of the lining, with amount of (bedsheet) fabric not being an issue, I added a couple of end pockets to the interior.

Custom Duffle by eSheep Designs
Interior end pocket...

Admittedly, the pockets do not function all that well when the bag is not filled to capacity (contents spill out), but I figure when it is filled and I need some things to be kept separate, they'll come in handy.

Custom Duffle by eSheep Designs
View of one of the end pockets...

These are nothing like the large gusseted end pockets of my store bought black and purple duffle, but at least I still have some secure storage at both ends.

Custom Duffle by eSheep Designs
Despite the little pucker, the fabric matching worked out well...

By the way, for the fact that I do not recall planning for this, I was stoked by how well the two fabrics ended up lining up evenly around the ends of the bag.


Check out crafty classes at Creativebug!
[affiliate link]


So I set out to make a duffle that could meet my needs at least as well as my old standby. Is the proof in the pudding? Well, here is a scale view of the duffle: it certainly ended up meeting my expectations for size. In these photos, there are six bath towels inside the bag.

Custom Duffle by eSheep Designs
For an idea of scale...

Custom Duffle by eSheep Designs
Padded shoulder strap...
For those of you thinking that the shoulder strap is too long, yes, that was my observation too. (Forgot to account for how much the strap anchors would add in terms of length.) I ended up doing some fancy stitching with it a few days after the photo shoot to shorten it up in the middle, which subsequently yields a padded section with three layers. The photo at right shows it in its final form.

I also know that in the long run, having just the buttons holding the strap in place will be an issue. I am planning on adding snap fasteners to relieve some of the stress. In the meantime, the shoulder strap is just a convenience; I rarely carry a duffle that way... unless I'm really in a hurry and trying to haul more than I should. In that vein, even though they had to be made shorter than I would have liked (due to fabric constraints), the handles can actually fit over my shoulder.

Custom Duffle by eSheep Designs
Here you can see the button feet on the bottom...

The photo below is a size comparison of the two duffles. They are essentially the same size once you take into consideration that the black bag is empty. (That one is, however, expandable.)

Custom Duffle by eSheep Designs
Definitely big enough to meet my needs!

Incidentally, this stands up quite well by itself when empty. (I didn't want it to be floppy even though it's made out of fabric and can be squished down if needed.) The combination of exterior fusible fleece and interior Decor Bond gives it excellent body. In the photo at the very top of this post, there is nothing inside of it.

Vera Bradley Medium Duffle Bag
image courtesy of verabradley.ca...
As you might guess from my opening ode to this duffle, I'm over the moon pleased with how it turned out. (Hubby says that I can sell it for big bucks.) The item is unique in the purest sense. While some folks may lust after a Vera Bradley branded duffle (e.g., at left), none of them are like mine. Transformed into something functional, every time I use it, I'm going to recall the source garments with much greater fondness than if I had donated them, or if they were still hanging (unworn) in my closet.

In fact, I'm now motivated to examine other things hanging unworn in my closet.

If nothing else, this project is proof that when you decide to take on a challenge like this — and treat it as a one of a kind experience that you're never going to have again — you'll find the means to have it turn out well.

May you be inspired to try something similar yourself.

'Til next...


6 comments:

  1. Hi Rochelle, Nice job! It’s a gorgeous bag! The contrasting fabrics look awesome together! And my fav part is those button feet on the bottom!
    Marie

    ReplyDelete
    Replies
    1. Many thanks, Marie! I'm usually not that good at combining random fabrics but something about these two jackets certainly "spoke" to me to do so. ;-)

      Delete
  2. That is quite a large bag and it looks great! I like the button feet. You will have to report on how well those hold up. I am sure they will be fine, but if you ever hauled around something heavy like bricks and set it down on those buttons, that's what I wonder about, will the buttons break with too much weight? I am sure you won't be hauling bricks or anything that heavy though. It is great you are upcycling fabrics too. I am doing more of that myself. As I continue to sew purses for Sew Powerful, I am using hubby's denim jeans, and I will eventually use stuff in my closet, but since I need to work through fabric first, I will let them remain in the closet. Nicely made duffle and oh no one would have seen those little puckers if you hadn't pointed them out.

    ReplyDelete
  3. Great job on all counts, Rochelle. I LOVE your duffle bag!!! The two fabrics are a perfect match - even better that they're pre-loved. Hmmm... I'm feeling inspired. Ha, ha, not to make a duffle bag, but to sew something a little simpler.

    ReplyDelete

You have the power to brighten my day. Leave me a comment; I'd love to hear your thoughts... you can even remain ANONYMOUS! And rest assured that I acknowledge all comments, either here or via email. (That is, if you don't see a response from me here, I would have responded privately to the person.) Spam or generic comments with unrelated links, however, are promptly removed... and I may take appropriate action or report you to Google. Thanks for reading! (✿◠‿◠)